Multi-Mode PWM Flyback Controller with Integrated BNI/BNO (Brown-In / Brown-Out) and Protection
In order to enhance the efficiency performance, the LD5523M1 integrates the multi-mode PWM controller, which consists of Quasi-Resonant (QR) PWM control for light load condition and peak lode mode for heavy load condition.
Moreover, the QR controller not only gains the system performance, but also brings the worse EMI capability, while the frequency swapping function of LD5523M1 can reduce reduce the EMI emission of SMPS and helps the power circuit designers to simply deal with EMI filter and saves several component and developing time.
The IC includes the comprehensive protection function, such as Over Power Protection (OPP), Over Voltage Protection (OVP), Output Short Circuit Protection (OSCP) and internal Over Temperature Protection (OTP). Furthermore, the programmable brown-in/out protection is built-in.
The IC is available in SMD. LD5523M1 GL in SOT-26 package.
FEATURES
▲ Low startup current (< 1mA)
▲ 0.26mA ultra-low operating current at light load
▲ Current mode control with cycle-by-cycle current limit
▲ Green mode control
▲ UVLO (under voltage lock out)
▲ LEB (leading-edge blanking) on CS pin
▲ VCC OVP (over voltage protection)
▲ Adj. OVP (over voltage protection) on FB pin
▲ Adjustable brown-in/out on FB pin
▲ OPP (over power protection)
▲ External OTP (over temperature protection) on CS pin
▲ Internal OTP (over temperature protection)
▲ SDSP (secondary diode short protection)
▲ 190mA/-150mA Gate source/sink capability at output pin with 33nF capacitor
APPLICATIONS
▲ Switching AC/DC adaptor
Datasheet 
